RAMSET SA270 Instruções de Operação descarregar pdf (Página 14)

DISASSEMBLY

14

DISASSEMBLY

TOOL DISASSEMBLY

1. Depress the detent pin to release

the pawl.

2. Lift the pawl up to release the barrel

assembly. Check the O-ring around the

pawl housing for damage and replace

as necessary.

3 Slide the barrel assembly out of the

tool body while holding the pawl in

the open position.

4. Slide the front barrel back until the

round shear pin is in line with the

perpendicular slot in the rear barrel.

5. Twist the front barrel in the slot and

rotate it 90°.

DEPRESS DETENT PIN TO RELEASE

THE PAWL

PIVOT PAWL UPWARD

REMOVE THE BARREL ASSEMBLY

ALIGN SHEAR PIN WITH SLOT

TWIST BARREL IN SLOT

AND ROTATE 90°

1 2 ... 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários